MAX4518EEE+
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4518 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~15V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 16pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 5pC (Max) |
| Channel-to-Channel Matching (ΔRon) | 4 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Length | 4.89mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
MAX4518EEE+ Overview
Packed in 16-SSOP (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 4:1. Operation at a temperature around -40°C~85°C TA. There are 16 terminations totally. Due to its 4 channels, the electrical component produces high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Based on SP4T switching circuits, these analog multiplexers work. The multiplexer consists of 1 circuits. MAX4518 can be used to search for analog multiplexer variants. You can find the functions of the 16 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER.
MAX4518EEE+ Features
4 Channels
Switch Circuit: SP4T
MAX4518EEE+ Applications
There are a lot of Maxim Integrated MAX4518EEE+ Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Frame Relay Equipment
- Medical systems
- Video switching
- High speed data transmission line cards
- Audio/video switches
- Battery Powered Systems
- PBXs
- New designs requiring multiplexer functions
- Cable PC
