Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Max Power Dissipation |
762mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4518 |
Pin Count |
16 |
Operating Supply Voltage |
12V |
Power Supplies |
3/5/+-5V |
Number of Channels |
4 |
Number of Circuits |
1 |
Max Supply Voltage |
15V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
1μA |
Throw Configuration |
4PST |
Propagation Delay |
150 ns |
Turn On Delay Time |
500 ns |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
2V~15V ±2.7V~8V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
400 ns |
Max Dual Supply Voltage |
8V |
On-State Resistance (Max) |
100Ohm |
Min Dual Supply Voltage |
2.7V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
5pF 16pF |
On-state Resistance Match-Nom |
4Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
150ns, 150ns |
Charge Injection |
5pC (Max) |
Channel-to-Channel Matching (ΔRon) |
4 Ω (Max) |
Crosstalk |
-92dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Length |
4.89mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX4518EEE Overview
Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. 4:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. A total of 16 terminations have been recorded. High-quality output is provided by the electronic component's 4 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. An injection of 16 pins is performed into the body of the electrical component. A SP4T switching circuit is used for these analog switches. 1 circuits are used in this analogue multiplexer. Search with MAX4518 if you are looking for analog multiplexer variants. Analog switches have 100Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 15V. An effective Dual, Single supply digital multiplexer. 2.7V is the lowest voltage that should be fed to the electronic electronic part. It would be sufficient to run this analogue multiplexer with 1μA current. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 2.7V. The electronic component can function from 12V.
MAX4518EEE Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4518EEE Applications
There are a lot of Maxim Integrated MAX4518EEE Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- MP3 players
- Audio signal routing
- Voice over IP/DSL – Integrated Access Devices, Smart
- Industrial control systems
- Audio and video routing
- SDH/SONET multiplexers
- Cellular phones
- Industrial
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8