MAX4518ESD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4518 |
| Pin Count | 14 |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Throw Configuration | 4PST |
| Turn On Delay Time | 275 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~15V ±2.7V~8V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 16pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 5pC (Max) |
| Channel-to-Channel Matching (ΔRon) | 4 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4518ESD Overview
The electrical component comes in 14-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. It is mounted in the position Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. 14 terminations have been made so far. This electronic part offers high-quality output due to its 4 channels. An 5V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 14 pins. Based on SP4T switching circuits, these analog multiplexers work. There are 1 circuits in this switch device. Look for analog switch ic variants by searching with MAX4518. This digital multiplexer has 100Ohm internal resistance. Please refer to the datasheets for 14 pins functions. Users shouldn't supply more than 15V voltage to the switch device. Dual, Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 2.7V. This digital switch can be operated with a current of 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 8V. With dual power supplies, you should attach at least 2.7V.
MAX4518ESD Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4518ESD Applications
There are a lot of Maxim Integrated MAX4518ESD Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Residential Gateways, Home Gateway/Router
- Private Branch Exchange (PBX)
- PDH Multiplexers
- Isolation
- Low-Voltage
- Sample hold systems
- Remote wireless modules
- Multi-Line E1 Interface Cards
- Battery Powered Systems
