MAX4519CEE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4519 |
| Pin Count | 16 |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~15V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 10pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 5pC (Max) |
| Channel-to-Channel Matching (ΔRon) | 4 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX4519CEE Overview
This electronic part is conveniently packaged in 16-SSOP (0.154, 3.90mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. There is 2:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around 0°C~70°C TA. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 2 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. Multiplexers built on a DPST - NO switching circuit are built. Circuits number 2 make up this analogue multiplexer. Try searching for the analog switch ic with MAX4519 if you are looking for variants. The internal resistance of this digital multiplexer is 100Ohm. For functions related to 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 15V voltage to the switch device. In order for the electronic part to function properly, the lowest voltage should be 2.7V. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 8V. With dual power supplies, you should attach at least 2.7V. Integrated with DIFFERENTIAL MULTIPLEXER analog IC.
MAX4519CEE Features
2 Channels
Switch Circuit: DPST - NO
MAX4519CEE Applications
There are a lot of Maxim Integrated MAX4519CEE Analog Switches & Multiplexers ICs applications.
- Cell phones
- PDH Multiplexers
- DSLAMs
- Precision instrumentation
- Digital access cross connects
- Public switching systems
- Channelized and Unchannelized DS3 applications
- DSUs
- MP3 players
- PDAs
