MAX4519CPD
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4519 |
| Pin Count | 14 |
| JESD-30 Code | R-PDIP-T14 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~15V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 10pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 5pC (Max) |
| Channel-to-Channel Matching (ΔRon) | 4 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Length | 19.05mm |
| RoHS Status | Non-RoHS Compliant |
MAX4519CPD Overview
Shipping overseas is convenient with the electronic component packed in 14-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. The operating temperature is extended to around 0°C~70°C TA. 14 terminations have been made so far. The electronic part provides high-quality output because it has 2 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. A key feature of the 14 series is the inclusion of this electronic part as part of its design. A DPST - NO switching circuit is used for these analog switches. This multiplexer is composed of 2 circuits. Use MAX4519 to search for variants of the digital switches. There is a standard Multiplexer or Switches analogue multiplexer here. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board.
MAX4519CPD Features
2 Channels
Switch Circuit: DPST - NO
MAX4519CPD Applications
There are a lot of Maxim Integrated MAX4519CPD Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Sample-and-hold systems
- SONET/SDH ADM
- Battery-powered systems
- 65 V DACs
- Industrial control systems
- High reliability control systems
- Microprocessor Controlled Analog Systems
- Fiber to the Home
- Digital cross connects (DSX-1)
