MAX4519EEE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4519 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~15V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 10pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 5pC (Max) |
| Channel-to-Channel Matching (ΔRon) | 4 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.89mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MAX4519EEE Overview
As the electronic part is packed in 16-SSOP (0.154, 3.90mm Width), international shipping is convenient. The advanced packaging method Tube provides high reliability. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. This electronic part offers high-quality output due to its 2 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. There is an electrical component included in the 16 series. On the other hand, analog switches can be constructed using DPST - NO switching circuits. The circuits in this analogue multiplexer number 2. Search with MAX4519 if you are looking for analog multiplexer variants. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board.
MAX4519EEE Features
2 Channels
Switch Circuit: DPST - NO
MAX4519EEE Applications
There are a lot of Maxim Integrated MAX4519EEE Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- Mechanical reed relay replacement
- Automatic test equipment
- Communication systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Access Concentrators
- Avionics and Military Systems
- HDTV
- Video signal routing
- Precision data acquisition
