MAX4519EPD
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4519 |
| Pin Count | 14 |
| JESD-30 Code | R-PDIP-T14 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 1μA |
| Throw Configuration | DPST |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~15V ±2.7V~8V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 10pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 5pC (Max) |
| Channel-to-Channel Matching (ΔRon) | 4 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Length | 19.05mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4519EPD Overview
Shipping overseas is convenient with the electronic component packed in 14-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have a number of circuits 2:1. Around -40°C~85°C TA is the extended operating temperature. In total, there are 14 terminations. The electronic part delivers high-quality output through its 2 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. A total of 14 pins are injected into the electrical part body. Multiplexers built on a DPST - NO switching circuit are built. It consists of 2 circuits. MAX4519 can be used to search for analog multiplexer variants. It has an internal resistance of 100Ohm. A analog switch ic that has a cost-effective Dual, Single supply type. An operating current of 1μA would be sufficient for this switch device.
MAX4519EPD Features
2 Channels
Switch Circuit: DPST - NO
1μA Supply Current
MAX4519EPD Applications
There are a lot of Maxim Integrated MAX4519EPD Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Remote wireless modules
- Cellular phones
- Communications systems
- Avionics test equipment
- Digital Cross-Connects
- Communication systems
- E1 Network Equipment
- Multi-Line E1 Interface Cards
- Cable Modem
