MAX4521CSE+T

80ns, 30ns SPST - NC 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4521 16 Pins 1nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4521CSE+T
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 533
Description: 80ns, 30ns SPST - NC 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4521 16 Pins 1nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	2007
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4521
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	6V
Power Supplies	3/5V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	80 ns
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	2V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	2pF 2pF
On-state Resistance Match-Nom	4Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	80ns, 30ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	30ns
Normal Position	NC
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4521CSE+T Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around 0°C~70°C TA are extended for operation. The total number of terminations is 16. The electronic part delivers high-quality output through its 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 16 series. A SPST - NC switching circuit is used to build these analog multiplexers. It consists of 4 circuits. Try searching for MAX4521 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 100Ohm. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. It would be sufficient to run this analogue multiplexer with 1μA current. It may damage the digital multiplexer if the voltage is higher than 1μA. Despite this switch's dual supply capability, its voltage should not exceed 6V. For dual power supplies, a voltage of at least 2V should be attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. 6V operating voltages can be used with this electrical part.