MAX4521EEE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Additional Feature | ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 80ns, 30ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -90dB @ 100kHz |
| Switch-on Time-Max | 80ns |
| Switch-off Time-Max | 30ns |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MAX4521EEE Overview
As the electronic part is packed in 16-SSOP (0.154, 3.90mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature around -40°C~85°C TA extended. Totally, there are 16 terminations. As a result of its 1 channels, this electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. SPST - NC switching circuits are used in these analog switch ics. It consists of 4 circuits. Check out the electrical component's additional features, such as the following: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY.
MAX4521EEE Features
1 Channels
Switch Circuit: SPST - NC
Additional Features: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
MAX4521EEE Applications
There are a lot of Rochester Electronics, LLC MAX4521EEE Analog Switches & Multiplexers ICs applications.
- PBXs
- Imaging
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- E1 Multiplexer
- RGB switches
- Fiber In The Loop (FITL)
- Data Acquisition Systems
- Audio signal routing
- Fiber to the Home
- Medical Instrumentation
