Parameters |
Max Power Dissipation |
696mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4521 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Operating Supply Voltage |
6V |
Power Supplies |
3/5/+-5V |
Number of Channels |
1 |
Number of Circuits |
4 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Operating Supply Current |
1μA |
Nominal Supply Current |
1μA |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
80 ns |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
250 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
100Ohm |
Min Dual Supply Voltage |
2V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
90 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
2pF 2pF |
On-state Resistance Match-Nom |
1Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
80ns, 30ns |
Charge Injection |
1pC |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Crosstalk |
-90dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
30ns |
Normal Position |
NC |
Height Seated (Max) |
1.75mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2007 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Additional Feature |
ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY |
Subcategory |
Multiplexer or Switches |
MAX4521EEE Overview
This electronic part is conveniently packaged in 16-SSOP (0.154, 3.90mm Width), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. A total of 16 terminations have been recorded. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. The electronic part body is injected with 16 pins. Multiplexers built on a SPST - NC switching circuit are built. The multiplexer consists of 4 circuits. If you are looking for variants of the digital switch, trying search with MAX4521. A 100Ohm internal resistance characterizes this multiplexer. The functions of 16 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. A low voltage of 2V should be applied to the electronic component. The switch device would be able to operate with 1μA current. It may damage the digital multiplexer if the voltage is higher than 1μA. Despite this switch device's dual supply capability, its voltage should not exceed 6V. If you are using a dual power supply, you should attach at least 2V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. 6V operating voltages can be used with this electrical part. Don't miss this electronic component's additional features, such as: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY.
MAX4521EEE Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
Additional Features: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
MAX4521EEE Applications
There are a lot of Maxim Integrated MAX4521EEE Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Sample-and-hold systems
- Cellular phones
- Battery Powered Instruments
- E1 Network Equipment
- Cable Modem
- ISDN NT1/TA
- Cell phones
- Fault Tolerant Systems
- Voice over IP/DSL – Integrated Access Devices, Smart