MAX4522CEE

80ns, 30ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4522 16 Pins 1nA 5V 16-SSOP (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4522CEE
Package: 16-SSOP (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 970
Description: 80ns, 30ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4522 16 Pins 1nA 5V 16-SSOP (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Height Seated (Max)	1.75mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2007
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.635mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4522
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	100 ns
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	40 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	2V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	2pF 2pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	80ns, 30ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	80ns
Switch-off Time-Max	30ns
Normal Position	NO

MAX4522CEE Overview

Due to its 16-SSOP (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, you'll find this switch device. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of 0°C~70°C TA degrees Celsius. There are 16 terminations totally. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. The analog switch ics are built using SPST - NO switching circuits. Circuits number 4 make up this analogue multiplexer. Try searching with MAX4522 to find analog multiplexer variants. It has an internal resistance of 100Ohm. Datasheets for 16 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 12V in normal situations. A analog switch ic that has a cost-effective Dual, Single supply type. There should be 2V voltage fed to the electrical part below 2V. In order to operate this switch device, it would need a current of 1μA. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. Despite this switch device's dual supply capability, its voltage should not exceed 6V. If you are using dual power supplies, you should attach at least 2V. There are SEPARATE OUTPUT outputs on this analog switch ic. There is a voltage range of 5V operating voltages for the electrical part. Additional features include: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY.