MAX4522CSE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4522 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 80ns, 30ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 80ns |
| Switch-off Time-Max | 30ns |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX4522CSE+ Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Around 0°C~70°C TA is the extended operating temperature. A total of 16 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 16 series. Unlike digital switches, these are based on SPST - NO switching circuits. The circuits in this analogue multiplexer number 4. Use MAX4522 to search for variants of the digital switches. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Additional features of the electronic component include: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY.
MAX4522CSE+ Features
1 Channels
Switch Circuit: SPST - NO
Additional Features: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
MAX4522CSE+ Applications
There are a lot of Maxim Integrated MAX4522CSE+ Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- Precision data acquisition
- Residential Gateways, Home Gateway/Router
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Automotive applications
- PDH Multiplexers
- Imaging
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- SONET
- Access Concentrators
