MAX4523CPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4523 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 80ns, 30ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 80ns |
| Switch-off Time-Max | 30ns |
| Length | 19.175mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX4523CPE Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tube is used to provide high reliability. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have a ratio of 1:1. The operating temperature is extended to around 0°C~70°C TA. The total number of terminations is 16. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. There is an electrical component included in the 16 series. A SPST - NO/NC switching circuit is used to build these analog multiplexers. A total of 4 circuits make up this switch device. Try searching for the analog switch ic with MAX4523 if you are looking for variants. Internally, this switch multiplexer has a resistance of 100Ohm. The datasheets for the 16 pins explain the functions. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 12V to a switch device. It is recommended to use 2V as the lowest voltage for the electrical part. For this switch, a dual supply voltage is feasible, but it must not exceed 6VWith dual power supplies, you should attach at least 2V. There are SEPARATE OUTPUT outputs on this analog switch ic. This electrical component also includes additional features such as ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY.
MAX4523CPE Features
1 Channels
Switch Circuit: SPST - NO/NC
Additional Features: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
MAX4523CPE Applications
There are a lot of Maxim Integrated MAX4523CPE Analog Switches & Multiplexers ICs applications.
- Wireless Local Loop
- Frame Relay Equipment
- Remote Powered Equipment
- Mechanical reed relay replacement
- SDH/SONET multiplexers
- Power routing
- Medical systems
- HDTV
- Video switching
- Automotive applications
