MAX4524CUB
| Parameters | |
|---|---|
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4524 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| On-State Resistance (Max) | 150Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 14pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | 0.8pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 200ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Signal Current-Max | 0.02A |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATE WITH 5V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
MAX4524CUB Overview
The electronic component is convenient to ship overseas because it is packed in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). To ensure high reliability, a new packaging method Tube is used. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 4:1. Operation at a temperature around 0°C~70°C TA. A total of 10 terminations have been recorded. This electronic part offers high-quality output due to its 4 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. This electrical component is included in the 10 series of products. Unlike digital switches, these are based on SP4T switching circuits. There are 1 circuits in this switch device. Try searching with MAX4524 if you're looking for variants. It is a typical Multiplexer or Switches analog multiplexer. The voltage required by this switch device is 2V~12V, draining from a single voltage supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Additional features include: ALSO OPERATE WITH 5V SINGLE SUPPLY.
MAX4524CUB Features
4 Channels
Switch Circuit: SP4T
Additional Features: ALSO OPERATE WITH 5V SINGLE SUPPLY
MAX4524CUB Applications
There are a lot of Maxim Integrated MAX4524CUB Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- Channelized and Unchannelized DS3 applications
- PBXs
- Fault Tolerant Systems
- High reliability control systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Frame Relay Equipment
- USB 1.1 signal switching circuits
- PDAs
- Ultrasound
