MAX4524LETB+T

150ns, 120ns SP4T 80Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4524 10 Pins 2nA 12V 10-WFDFN Exposed Pad

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4524LETB+T
Package: 10-WFDFN Exposed Pad
Datasheet: PDF
Stock: 254
Description: 150ns, 120ns SP4T 80Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4524 10 Pins 2nA 12V 10-WFDFN Exposed Pad(Kg)

Details

Tags

Parameters
Pin Count	10
Number of Channels	4
Number of Circuits	1
Max Supply Voltage	12.6V
Min Supply Voltage	2V
Operating Supply Current	1μA
Logic Function	Demultiplexer, Multiplexer
Supply Type	Single
-3db Bandwidth	200MHz
On-State Resistance (Max)	80Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	92 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	4pF 14pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	150ns, 120ns
Charge Injection	0.8pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2V~12V
Signal Current-Max	0.02A
Height Seated (Max)	0.8mm
Length	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-WFDFN Exposed Pad
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	80Ohm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	12V
Terminal Pitch	0.5mm
Base Part Number	MAX4524

MAX4524LETB+T Overview

Packed in 10-WFDFN Exposed Pad, the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 10. A high-quality output is provided by the electrical component's 4 channels. If the voltage supply is 12V volts, the electrical component should be turned on and run. There are 10 pins injected into the electronic part body. These analog multiplexers are built based on SP4T switching circuits. The multiplexer consists of 1 circuits. Look for analog switch ic variants by searching with MAX4524. Analog switches have 80Ohm internal resistance. To find out what the 10 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 12.6V. The digital multiplexer has a low cost Single supply. There should be 2V voltage fed to the electrical part below 2V. 1μA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 2V~12V.