MAX4526CSA

SPDT 175Ohm Analog Switches BREAK-BEFORE-MAKE MAX4526 8 Pins 500pA 15V 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4526CSA
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 688
Description: SPDT 175Ohm Analog Switches BREAK-BEFORE-MAKE MAX4526 8 Pins 500pA 15V 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Neg Supply Voltage-Nom (Vsup)	-15V
Max Dual Supply Voltage	20V
On-State Resistance (Max)	175Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	18V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	13pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPDT
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	0.1ns
Switch-off Time-Max	0.1ns
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1997
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	175Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	471mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4526
Pin Count	8
Operating Supply Voltage	20V
Power Supplies	+-15V
Number of Channels	2
Max Supply Voltage	36V
Min Supply Voltage	4.5V
Analog IC - Other Type	SPST
Operating Supply Current	700μA
Nominal Supply Current	50nA
Max Supply Current	1μA
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~18V
Supply Type	Dual, Single

MAX4526CSA Overview

Packed in 8-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around 0°C~70°C TA. In total, there are 8 terminations. Due to its 2 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. 8 pins are injected to the electronic part body. The analog switch ics are built using SPDT switching circuits. Try searching with MAX4526 to find analog multiplexer variants. Analog switches have 175Ohm internal resistance. You can find the functions of the 8 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 36V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 4.5V should be the lowest voltage fed to the electronic component. It would be sufficient to run this analogue multiplexer with 700μA current. It may damage the digital multiplexer if the voltage is higher than 1μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. There is an integrated analog IC SPST in the module. This electrical part is compatible with 20V operating voltages.