Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
1997 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
175Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
330mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4526 |
Pin Count |
8 |
Operating Supply Voltage |
20V |
Power Supplies |
+-15V |
Number of Channels |
2 |
Max Supply Voltage |
36V |
Min Supply Voltage |
4.5V |
Analog IC - Other Type |
SPST |
Operating Supply Current |
700μA |
Nominal Supply Current |
50nA |
Max Supply Current |
1mA |
Voltage - Supply, Single/Dual (±) |
4.5V~36V ±4.5V~18V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
175Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
65 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
13pF |
On-state Resistance Match-Nom |
0.5Ohm |
Switch Circuit |
SPDT |
Charge Injection |
1pC |
Channel-to-Channel Matching (ΔRon) |
500m Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
0.1ns |
Switch-off Time-Max |
0.1ns |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX4526EUA Overview
Packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 2:1. Extended operating temperature around -40°C~85°C TA. Totally, there are 8 terminations. A 2 channel electronic part produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. This electrical component is included in the 8 series of products. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching for MAX4526 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 175Ohm. To find out what the 8 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. Digital switch that provides Dual, Single power at a cost-effective price. 4.5V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 700μA. Putting voltage greater than 1mA on the multiplexer may cause damage. Despite this switch's dual supply capability, its voltage should not exceed 20V. The voltage should be at least 4.5V if you are using dual power supplies. An analog IC with the number SPST is integrated into this board. It can operate from 20V operating voltages.
MAX4526EUA Features
2 Channels
Switch Circuit: SPDT
700μA Supply Current
MAX4526EUA Applications
There are a lot of Maxim Integrated MAX4526EUA Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Access Concentrators
- Imaging
- Microwave transmission systems
- Industrial control systems
- Multi-Line E1 Interface Cards
- Relay replacements
- Battery Powered Systems
- DSLAMs
- Battery-powered systems