MAX4528CPA

SPDT 110Ohm Analog Switches BREAK-BEFORE-MAKE MAX4528 8 Pins 500pA 8-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4528CPA
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 625
Description: SPDT 110Ohm Analog Switches BREAK-BEFORE-MAKE MAX4528 8 Pins 500pA 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1995
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	110Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	330mW
Technology	CMOS
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4528
Output	SEPARATE OUTPUT
Pin Count	8
Power Supplies	3/5/+-5V
Number of Channels	2
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Analog IC - Other Type	SPST
Operating Supply Current	1μA
Nominal Supply Current	10μA
Max Supply Current	1μA
Turn On Delay Time	175 ns
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.7V~6V
Supply Type	Dual, Single
Turn-Off Delay Time	175 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	110Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	2:1
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	13pF
On-state Resistance Match-Nom	8Ohm
Switch Circuit	SPDT
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	3 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Length	9.375mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX4528CPA Overview

This electronic part is conveniently packaged in 8-DIP (0.300, 7.62mm), making it easy to ship abroad. High reliability is provided by advanced packaging method Tube. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have the same number of circuits 2:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. In total, there are 8 terminations. Due to its 2 channels, the electrical component produces high-quality output. It is part of the design of the 8 series that this electronic component is included. Unlike digital switches, these are based on SPDT switching circuits. Using the MAX4528 search parameter, you can discover variants of the switch. Analog switches have 110Ohm internal resistance. You can find the functions of the 8 pins in the datasheets. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. A analog switch ic that has a cost-effective Dual, Single supply type. The lowest voltage the electronic part should receive is 2.7V. 1μA current would be enough for this multiplexer to operate. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. There is no problem with using dual supply voltage, but it should not exceed 6V. If you are using dual power supplies, you should attach at least 2.7V. Integrated with an analog IC SPST. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.