Parameters |
ECCN Code |
EAR99 |
Resistance |
110Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
330mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4528 |
Output |
SEPARATE OUTPUT |
Pin Count |
8 |
Operating Supply Voltage |
6V |
Power Supplies |
3/5/+-5V |
Number of Channels |
1 |
Number of Circuits |
2 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2.7V |
Analog IC - Other Type |
SPST |
Operating Supply Current |
1μA |
Nominal Supply Current |
10μA |
Max Supply Current |
1μA |
Voltage - Supply, Single/Dual (±) |
2.7V~12V ±2.7V~6V |
Supply Type |
Dual, Single |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
110Ohm |
Min Dual Supply Voltage |
2.7V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
13pF |
On-state Resistance Match-Nom |
8Ohm |
Switch Circuit |
SPDT |
Charge Injection |
1pC |
Channel-to-Channel Matching (ΔRon) |
3 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
400ns |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1998 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
MAX4528CUA Overview
As the electronic part is packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Extended operating temperature around 0°C~70°C TA. In total, 8 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. A key feature of the 8 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SPDT switching circuits. The multiplexer consists of 2 circuits. MAX4528 can be used to search for analog multiplexer variants. This digital multiplexer has 110Ohm internal resistance. The functions of 8 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 12V in normal situations. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage the electronic part should receive is 2.7V. The switch device would be able to operate with 1μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. Despite this switch's dual supply capability, its voltage should not exceed 6V. The voltage should be at least 2.7V if you are using dual power supplies. There is an analog IC SPST integrated with this board. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. The electronic component can function from 6V.
MAX4528CUA Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
MAX4528CUA Applications
There are a lot of Maxim Integrated MAX4528CUA Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Ultrasound
- Switching Systems
- PDAs
- Audio and video switching
- Relay replacements
- Digital Cross-Connects
- E1 Multiplexer
- MP3 players
- Data Acquisition Systems