MAX4528EPA
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 110Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4528 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Analog IC - Other Type | SPST |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±2.7V~6V |
| On-State Resistance (Max) | 110Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Circuit | SPDT |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Length | 9.375mm |
| RoHS Status | Non-RoHS Compliant |
MAX4528EPA Overview
The electronic component is convenient to ship overseas because it is packed in a 8-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature around -40°C~85°C TA extended. Totally, there are 8 terminations. The electronic part delivers high-quality output through its 1 channels. There are 8 pins injected into the electronic part body. A SPDT switching circuit is used to build these analog multiplexers. There are 2 circuits in this switch device. Try searching with MAX4528 if you're looking for variants. The internal resistance of this digital multiplexer is 110Ohm. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is integrated with a SPST analog IC. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
MAX4528EPA Features
1 Channels
Switch Circuit: SPDT
MAX4528EPA Applications
There are a lot of Maxim Integrated MAX4528EPA Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Audio signal routing
- Cellular phones
- Medical systems
- Digital access cross connects
- Fiber In The Loop (FITL)
- RGB switches
- USB 1.1 signal switching circuits
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Central office
