MAX4528EUA

SPDT 110Ohm Analog Switches BREAK-BEFORE-MAKE MAX4528 8 Pins 500pA 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4528EUA
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 433
Description: SPDT 110Ohm Analog Switches BREAK-BEFORE-MAKE MAX4528 8 Pins 500pA 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1998
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	110Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	330mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4528
Pin Count	8
Operating Supply Voltage	6V
Polarity	Non-Inverting
Power Supplies	3/5/+-5V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Analog IC - Other Type	SPST
Operating Supply Current	1μA
Nominal Supply Current	10μA
Max Supply Current	1μA
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.7V~6V
Supply Type	Dual, Single
Max Dual Supply Voltage	6V
On-State Resistance (Max)	110Ohm
Min Dual Supply Voltage	2.7V
High Level Output Current	20mA
Multiplexer/Demultiplexer Circuit	2:1
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	13pF
On-state Resistance Match-Nom	8Ohm
Switch Circuit	SPDT
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	3 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Height Seated (Max)	1.1mm
Length	3mm
Width	3mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX4528EUA Overview

Due to its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. There are 8 terminations totally. High-quality output is provided by the electronic component's 1 channels. The electrical component body receives 8 pins. Circuits based on SPDT switching are used to construct these analog switch ics. There are 2 circuits in this switch device. Search with MAX4528 if you are looking for analog multiplexer variants. There is 110Ohm internal resistance in this digital multiplexer. Datasheets for functions of 8 pins are available. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2.7V. For this multiplexer to operate, 1μA current would be sufficient. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. A dual power supply should have at least 2.7V voltage attached. Integrated with SPST analog IC. It can operate from 6V operating voltages.