MAX4530CAP+T
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4530 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 15pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -92dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
MAX4530CAP+T Overview
This electronic part is conveniently packaged in 20-SSOP (0.209, 5.30mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to 0°C~70°C TA. 20 terminations have been made so far. The electronic part provides high-quality output because it has 8 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electronic part body is injected with 20 pins. Circuits number 1 make up this analogue multiplexer. Using the MAX4530 search parameter, you can discover variants of the switch. The analogue multiplexer in this example is a typical Multiplexer or Switches. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board.
MAX4530CAP+T Features
8 Channels
MAX4530CAP+T Applications
There are a lot of Maxim Integrated MAX4530CAP+T Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Avionics
- Precision test equipment
- Fiber to the Home
- New designs requiring multiplexer functions
- Medical
- T1/E1 Terminals
- Fiber In The Loop (FITL)
- PDAs
- Optical Applications
