MAX4530EPP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4530 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Throw Configuration | SP8T |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 15pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -92dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4530EPP Overview
The electronic part can be shipped overseas conveniently because it is packaged in 20-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, you'll find this switch device. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. In total, there are 20 terminations. A 8 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. A key feature of the 20 series is the inclusion of this electronic part as part of its design. This multiplexer is composed of 1 circuits. MAX4530 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 75Ohm. Dual, Single supply type digital switch with a low cost.
MAX4530EPP Features
8 Channels
MAX4530EPP Applications
There are a lot of Maxim Integrated MAX4530EPP Analog Switches & Multiplexers ICs applications.
- ATM
- Channel Banks
- Transmit
- High reliability control systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- E1 Network Equipment
- MP3 players
- Digital Cross-Connects
- CSU
- PCMCIA cards
