Parameters |
Min Dual Supply Voltage |
2V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
65 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
3pF 15pF |
On-state Resistance Match-Nom |
1Ohm |
Switch Time (Ton, Toff) (Max) |
150ns, 100ns |
Charge Injection |
1.5pC |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Crosstalk |
-92dB @ 1MHz |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2001 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Resistance |
75Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
800mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
MAX4530 |
Pin Count |
20 |
JESD-30 Code |
R-PDSO-G20 |
Operating Supply Voltage |
9V |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Operating Supply Current |
1μA |
Propagation Delay |
150 ns |
Turn On Delay Time |
350 ns |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
150 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
75Ohm |
MAX4530EWP+T Overview
The electronic component is convenient to ship overseas because it is packed in a 20-SOIC (0.295, 7.50mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 8:1. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 20. Due to its 8 channels, the electrical component produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. A total of 20 pins are injected into the body of the electronic part. A 1 circuit is present in this switch device. Search with MAX4530 if you are looking for analog multiplexer variants. There is 75Ohm internal resistance in this digital multiplexer. Users should never supply a voltage higher than 12V to a switch device. An effective Dual, Single supply digital multiplexer. It is recommended to use 2V as the lowest voltage for the electrical part. For this digital switch to work, 1μA current would suffice. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. If you are using a dual power supply, you should attach at least 2V. It can operate from 9V operating voltages.
MAX4530EWP+T Features
8 Channels
1μA Supply Current
MAX4530EWP+T Applications
There are a lot of Maxim Integrated MAX4530EWP+T Analog Switches & Multiplexers ICs applications.
- High-Voltage
- New designs requiring multiplexer functions
- Sample-and-hold systems
- Remote wireless modules
- Audio signal routing
- Microprocessor Controlled Analog Systems
- Central office
- Cell phones
- High speed data transmission line cards
- Residential Gateways, Home Gateway/Router