MAX4531EPP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4531 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Throw Configuration | 4PST |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 15pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -92dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 100ns |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4531EPP Overview
Shipping overseas is convenient due to the electrical component's packing in 20-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. Mounted in Through Hole is this multiplexer. Multiplexer and demultiplexer circuits have a number 4:1. Temperatures around -40°C~85°C TA are extended for operation. 20 terminations have been made so far. A high-quality output is provided by the electrical component's 4 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An electrical component like this is included in the 20 series. A SP4T switching circuit is used to build these analog multiplexers. This multiplexer is composed of 2 circuits. Look for analog switch ic variants by searching with MAX4531. This digital multiplexer has 75Ohm internal resistance. A cost-effective Dual, Single supply type analogue multiplexer.
MAX4531EPP Features
4 Channels
Switch Circuit: SP4T
MAX4531EPP Applications
There are a lot of Maxim Integrated MAX4531EPP Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- Signal routing between systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- DVD-R
- ATM
- Communication systems
- PDAs
- Automatic test equipment
- DSLAMs
- PBX interfaces
