MAX4531EWP+T
| Parameters | |
|---|---|
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -92dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 100ns |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4531 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 15pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
MAX4531EWP+T Overview
Due to its 20-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 20 terminations totally. By its 4 channels, the electronic component provides high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 20 pins. A SP4T switching circuit is used to build these analog multiplexers. A total of 2 circuits make up this switch device. Try searching for MAX4531 variants of the analog switch ic. Theswitch device is a typical Multiplexer or Switches. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER.
MAX4531EWP+T Features
4 Channels
Switch Circuit: SP4T
MAX4531EWP+T Applications
There are a lot of Maxim Integrated MAX4531EWP+T Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Industrial control systems
- Mechanical reed relay replacement
- Fiber to the Home
- Video switching
- Data switching
- Voice over IP/DSL – Integrated Access Devices, Smart
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Battery-powered systems
- Multi-Line E1 Interface Cards
