MAX4532CAP
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4532 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 15pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -92dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 1.99mm |
| Length | 7.2mm |
| Width | 5.29mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4532CAP Overview
The electrical component comes in 20-SSOP (0.209, 5.30mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, this analog switch is mounted. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature around 0°C~70°C TA extended. Totally, there are 20 terminations. As a result of its 1 channels, this electronic component provides high-quality output. A 5V voltage supply should turn on and run the electronic component. A key feature of the 20 series is the inclusion of this electronic part as part of its design. These analog multiplexers are built based on SPDT switching circuits. It consists of 3 circuits. Try searching for MAX4532 variants of the analog switch ic. A analogue multiplexer of this type is a Multiplexer or Switches.
MAX4532CAP Features
1 Channels
Switch Circuit: SPDT
MAX4532CAP Applications
There are a lot of Maxim Integrated MAX4532CAP Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- Transmit
- Fiber In The Loop (FITL)
- FTTH
- Microprocessor Controlled Analog Systems
- Industrial control systems
- Video switching
- Fiber to the Home
- Fault Tolerant Systems
- Channelized and Unchannelized DS3 applications
