MAX4532CAP+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Resistance | 75Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX4532 |
| Pin Count | 20 |
| Operating Supply Voltage | 9V |
| Number of Channels | 3 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 350 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 75Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 15pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -92dB @ 1MHz |
| Height Seated (Max) | 1.99mm |
| Length | 7.2mm |
| Width | 5.29mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
MAX4532CAP+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 20-SSOP (0.209, 5.30mm Width). The advanced packaging method Tube provides high reliability. Mounted in Surface Mount is this multiplexer. 2:1 is the ratio between multiplexers and demultiplexers. Temperatures around 0°C~70°C TA are extended for operation. In total, 20 terminations have occurred. A electrical component with 3 channels is capable of high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 20 pins. Unlike digital switches, these are based on SPDT switching circuits. If you are looking for variants of the digital switch, trying search with MAX4532. An switch multiplexer with 75Ohm internal resistance has a value of 75Ohm. For functions related to 20 pins, please refer to the datasheets. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 2V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 1μA. Despite this switch's dual supply capability, its voltage should not exceed 6V. When using dual power supplies, you should attach at least 2V. 9V operating voltages can be used with this electrical part.
MAX4532CAP+ Features
3 Channels
Switch Circuit: SPDT
1μA Supply Current
MAX4532CAP+ Applications
There are a lot of Maxim Integrated MAX4532CAP+ Analog Switches & Multiplexers ICs applications.
- Industrial
- Avionics and Military Systems
- Communication systems
- Modems
- Data switching
- Channelized and Unchannelized DS3 applications
- Video switching
- DVD-R
- Communication systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
