MAX4532EWP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4532 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 15pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -92dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4532EWP Overview
This electronic part is conveniently packaged in 20-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tube. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Extended operating temperature around -40°C~85°C TA. In total, 20 terminations have occurred. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. A total of 20 pins are injected into the body of the electronic part. The analog switch ics are built using SPDT switching circuits. This multiplexer is composed of 3 circuits. Search with MAX4532 if you are looking for analog multiplexer variants. There is 75Ohm internal resistance in this digital multiplexer. Analogue multiplexers of the Dual, Single supply type that are cost-effective.
MAX4532EWP Features
1 Channels
Switch Circuit: SPDT
MAX4532EWP Applications
There are a lot of Maxim Integrated MAX4532EWP Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- Multiplexers
- Avionics
- Voice over IP/DSL – Integrated Access Devices, Smart
- Cross Connects
- New designs requiring multiplexer functions
- RGB switches
- Audio/video switches
- Frame Relay Equipment
- Imaging
