MAX4533CAP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 175Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 842mW |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4533 |
| Pin Count | 20 |
| Operating Supply Voltage | 18V |
| Polarity | Non-Inverting |
| Power Supplies | 12/+-15V |
| Number of Channels | 4 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 9V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 600μA |
| Turn On Delay Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 500 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 175Ohm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 250ns, 150ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -66dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 150ns |
| Drain to Source Resistance | 125Ohm |
| Height | 1.78mm |
| Length | 7.33mm |
| Width | 5.38mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX4533CAP+ Overview
Shipping overseas is convenient with the electronic component packed in 20-SSOP (0.209, 5.30mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 2:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. In total, 20 terminations have occurred. A electrical component with 4 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. It is injected into the electrical part body with 20 pins. Based on SPDT switching circuits, these analog multiplexers work. Using the MAX4533 search parameter, you can discover variants of the switch. It has an internal resistance of 175Ohm. For functions related to 20 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Multiplexers should not be powered above 36V in normal situations. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage the electronic part should receive is 9V. A digital multiplexer may suffer damage if voltage is applied above 600μA. Despite this switch device's dual supply capability, its voltage should not exceed 18V. A dual power supply should have at least 4.5V voltage attached. It can operate from 18V operating voltages. Resistivity from Drain to Source is 125Ohm for this electronic part.
MAX4533CAP+ Features
4 Channels
Switch Circuit: SPDT
Drain-to-Source resistance: 125Ohm
MAX4533CAP+ Applications
There are a lot of Maxim Integrated MAX4533CAP+ Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- Cable PC
- Industrial
- Avionics
- Routers
- PBXs
- Optical Applications
- Channel Banks
- New designs requiring multiplexer functions
- Precision test equipment
