MAX4533CAP
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | CAN ALSO OPERATE AT 12V NOMINAL |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4533 |
| Output | SEPARATE OUTPUT |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Power Supplies | 12/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 175Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 250ns, 150ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -66dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 1.99mm |
| Length | 7.2mm |
| Width | 5.29mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4533CAP Overview
Packed in 20-SSOP (0.209, 5.30mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to 0°C~70°C TA. In total, there have been 20 terminations. By its 1 channels, the electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 20 pins. Multiplexers built on a SPDT switching circuit are built. There are 4 circuits in this multiplexer. Using the MAX4533 search parameter, you can discover variants of the switch. Multiplexer or Switches is a typical switch device. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Additional features include: CAN ALSO OPERATE AT 12V NOMINAL.
MAX4533CAP Features
1 Channels
Switch Circuit: SPDT
Additional Features: CAN ALSO OPERATE AT 12V NOMINAL
MAX4533CAP Applications
There are a lot of Maxim Integrated MAX4533CAP Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Sample-and-hold systems
- SDH/SONET multiplexers
- Precision test equipment
- Remote wireless modules
- E1 Multiplexer
- Automatic test equipment
- Audio signal routing
- Private Branch Exchange (PBX)
- Video switching
