MAX4533CWP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 175Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4533 |
| Pin Count | 20 |
| Operating Supply Voltage | 18V |
| Polarity | Non-Inverting |
| Power Supplies | 12/+-15V |
| Number of Channels | 4 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 9V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 600μA |
| Turn On Delay Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 500 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 175Ohm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 250ns, 150ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -66dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
MAX4533CWP+ Overview
Shipping overseas is convenient due to the electrical component's packing in 20-SOIC (0.295, 7.50mm Width). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Extended operating temperature around 0°C~70°C TA. In total, there are 20 terminations. This electronic part offers high-quality output due to its 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. Into the electrical component body are injected 20 pins. A SPDT switching circuit is used to build these analog multiplexers. If you are looking for variants of the digital switch, trying search with MAX4533. As far as internal resistance is concerned, it has 175Ohm. Datasheets for functions of 20 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 36V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. The lowest voltage the electronic part should receive is 9V. A voltage higher than 600μA may cause damage to the switch multiplexer. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. With dual power supplies, you should attach at least 4.5V. 18V operating voltages are supported by the electronic component.
MAX4533CWP+ Features
4 Channels
Switch Circuit: SPDT
MAX4533CWP+ Applications
There are a lot of Maxim Integrated MAX4533CWP+ Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Cable Modem
- Audio and video routing
- ATM
- RGB switches
- Medical
- Industrial
- Digital cross connects (DSX-1)
- SONET
- Avionics test equipment
