MAX4533CWP
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | CAN ALSO OPERATE AT 12V NOMINAL |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4533 |
| Output | SEPARATE OUTPUT |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Power Supplies | 12/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 175Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 250ns, 150ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -66dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4533CWP Overview
As the electronic part is packed in 20-SOIC (0.295, 7.50mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. 2:1 is the ratio between multiplexers and demultiplexers. Around 0°C~70°C TA is the extended operating temperature. 20 terminations have been made so far. A high-quality output is provided by the electrical component's 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. There is an electrical component included in the 20 series. A SPDT switching circuit is used for these analog switches. Circuits number 4 make up this analogue multiplexer. Try searching with MAX4533 to find analog multiplexer variants. In this analog multiplexer, the value is Multiplexer or Switches. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. There is also CAN ALSO OPERATE AT 12V NOMINAL to look out for in this electronic part.
MAX4533CWP Features
1 Channels
Switch Circuit: SPDT
Additional Features: CAN ALSO OPERATE AT 12V NOMINAL
MAX4533CWP Applications
There are a lot of Maxim Integrated MAX4533CWP Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Audio and video switching
- Remote Powered Equipment
- Isolation
- HDTV
- ISDN NT1/TA
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Sample-and-hold systems
- Industrial control systems
- CSU
