MAX4533CWP+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE AT 12V NOMINAL |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4533 |
| Output | SEPARATE OUTPUT |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Power Supplies | 12/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 175Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 250ns, 150ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -66dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
MAX4533CWP+T Overview
This electronic part is conveniently packaged in 20-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. The advanced packaging method Tape & Reel (TR) provides high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Around 0°C~70°C TA is the extended operating temperature. In total, 20 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. It is injected into the electrical part body with 20 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. A 4 circuit is present in this switch device. MAX4533 can be used to search for analog multiplexer variants. There is a standard Multiplexer or Switches analogue multiplexer here. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Check out the electrical component's additional features, such as the following: CAN ALSO OPERATE AT 12V NOMINAL.
MAX4533CWP+T Features
1 Channels
Switch Circuit: SPDT
Additional Features: CAN ALSO OPERATE AT 12V NOMINAL
MAX4533CWP+T Applications
There are a lot of Maxim Integrated MAX4533CWP+T Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Switching Systems
- Industrial
- E1 Network Equipment
- Frame Relay Equipment
- 65 V DACs
- Cellular phones
- Communication systems
- DSLAMs
- Medical Instrumentation
