MAX4534CUD

275ns, 200ns SP4T 400Ohm Analog Switches BREAK-BEFORE-MAKE MAX4534 14 Pins 500pA 15V 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4534CUD
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 674
Description: 275ns, 200ns SP4T 400Ohm Analog Switches BREAK-BEFORE-MAKE MAX4534 14 Pins 500pA 15V 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Supply Type	Dual, Single
Supply Current-Max (Isup)	0.375mA
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	400Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	5pF 6.5pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	275ns, 200ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-53dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	275ns
Switch-off Time-Max	200ns
Signal Current-Max	0.03A
Height	950μm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2005
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	400Ohm
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4534
Pin Count	14
Operating Supply Voltage	28V
Number of Channels	4
Number of Circuits	1
Max Supply Voltage	36V
Min Supply Voltage	9V
Operating Supply Current	400μA
Propagation Delay	350 ns
Turn On Delay Time	500 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	9V~36V ±4.5V~20V

MAX4534CUD Overview

Packed in 14-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tube is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around 0°C~70°C TA. Totally, there are 14 terminations. A 4 channel electronic part produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. There are 14 pins injected into the electronic part body. Based on SP4T switching circuits, these analog multiplexers work. There are 1 circuits in this switch device. Try searching with MAX4534 if you're looking for variants. Internally, this switch multiplexer has a resistance of 400Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. normally, users should not supply switches with voltages higher than 36V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 9V. For this digital switch to work, 400μA current would suffice. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. If you are using a dual power supply, you should attach at least 4.5V. The electronic component can function from 28V.