MAX4534EPD
| Parameters | |
|---|---|
| Resistance | 400Ohm |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4534 |
| Pin Count | 14 |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 9V |
| Throw Configuration | 4PST |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~20V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.375mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 400Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 6.5pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 275ns, 200ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -53dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 275ns |
| Switch-off Time-Max | 200ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
MAX4534EPD Overview
The electrical component comes in 14-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Through Hole. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. In total, 14 terminations have occurred. A 4 channel electronic part produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. 14 pins are injected to the electronic part body. These analog multiplexers are built based on SP4T switching circuits. Circuits number 1 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX4534. Internally, this switch multiplexer has a resistance of 400Ohm. In normalcircumstances, users should not exceed 36V volts for the multiplexer. A analog switch ic that has a cost-effective Dual, Single supply type. 9V is the lowest voltage the electrical component should receive. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. If you are using a dual power supply, you should attach at least 4.5V.
MAX4534EPD Features
4 Channels
Switch Circuit: SP4T
MAX4534EPD Applications
There are a lot of Maxim Integrated MAX4534EPD Analog Switches & Multiplexers ICs applications.
- PDH Multiplexers
- Low-Voltage
- Signal routing between systems
- DVD-R
- Isolation
- Industrial control systems
- HDTV
- FTTH
- Private Branch Exchange (PBX)
- Precision instrumentation
