MAX4534ESD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4534 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~20V |
| Supply Current-Max (Isup) | 0.375mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 6.5pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 275ns, 200ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -53dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 275ns |
| Switch-off Time-Max | 200ns |
| Signal Current-Max | 0.03A |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX4534ESD+ Overview
Presented in 14-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. A total of 14 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. The electronic part body is injected with 14 pins. Circuits based on SP4T switching are used to construct these analog switch ics. A total of 1 circuits make up this switch device. Look for analog switch ic variants by searching with MAX4534. The datasheets for the 14 pins explain the functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board.
MAX4534ESD+ Features
4 Channels
Switch Circuit: SP4T
MAX4534ESD+ Applications
There are a lot of Maxim Integrated MAX4534ESD+ Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Sample-and-hold systems
- Intelligent PBX
- PBXs
- Imaging
- Fault Tolerant Systems
- Optical Applications
- Precision test equipment
- Industrial
- Industrial control systems
