MAX4535CPD
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4535 |
| Pin Count | 14 |
| Operating Supply Voltage | 28V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 9V |
| Operating Supply Current | 400μA |
| Throw Configuration | DPST |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 500 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~20V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.375mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 400Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 4pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 275ns, 200ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -53dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Length | 19.05mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4535CPD Overview
Shipping overseas is convenient with the electronic component packed in 14-DIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. Mounted in Through Hole is this multiplexer. 2:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around 0°C~70°C TA. There are 14 terminations totally. The electronic part delivers high-quality output through its 2 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. Electronic part bodies are injected with 14 pins. On the other hand, analog switches can be constructed using DPST - NO switching circuits. The multiplexer consists of 2 circuits. MAX4535 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 400Ohm. For functions related to 14 pins, please refer to the datasheets. Users should never supply a voltage higher than 36V to a switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 9V. 400μA current would be enough for this multiplexer to operate. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. You should attach at least 4.5V voltage if you are using dual power supply. Operating voltages of 28V are compatible with the electrical part.
MAX4535CPD Features
2 Channels
Switch Circuit: DPST - NO
400μA Supply Current
MAX4535CPD Applications
There are a lot of Maxim Integrated MAX4535CPD Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Industrial control systems
- 65 V DACs
- Optical Applications
- Video switching
- Fiber to the Home
- Routers
- Private Branch Exchange (PBX)
- DSLAMs
- Sample hold systems
