Parameters |
Off-state Isolation-Nom |
62 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
5pF 4pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Circuit |
DPST - NO |
Switch Time (Ton, Toff) (Max) |
275ns, 200ns |
Charge Injection |
1pC |
Channel-to-Channel Matching (ΔRon) |
2 Ω |
Crosstalk |
-53dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.03A |
Height Seated (Max) |
1.1mm |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4535 |
Pin Count |
14 |
JESD-30 Code |
R-PDSO-G14 |
Qualification Status |
Not Qualified |
Number of Channels |
2 |
Number of Circuits |
2 |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Voltage - Supply, Single/Dual (±) |
9V~36V ±4.5V~20V |
Supply Current-Max (Isup) |
0.375mA |
Neg Supply Voltage-Nom (Vsup) |
-15V |
On-State Resistance (Max) |
400Ohm |
Multiplexer/Demultiplexer Circuit |
2:1 |
MAX4535CUD Overview
This electronic part is conveniently packaged in 14-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around 0°C~70°C TA are extended for operation. A total of 14 terminations have been recorded. This electronic part offers high-quality output due to its 2 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 14 pins. A DPST - NO switching circuit is used to build these analog multiplexers. It consists of 2 circuits. Look for analog switch ic variants by searching with MAX4535. There is a standard Multiplexer or Switches analogue multiplexer here. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs.
MAX4535CUD Features
2 Channels
Switch Circuit: DPST - NO
MAX4535CUD Applications
There are a lot of Maxim Integrated MAX4535CUD Analog Switches & Multiplexers ICs applications.
- Cell phones
- Industrial control systems
- Access Concentrators
- Data Acquisition Systems
- Video switching
- PCMCIA cards
- Imaging
- Relay replacements
- Microprocessor Controlled Analog Systems
- Residential Gateways, Home Gateway/Router