banner_page

MAX4536CPE

100ns, 50ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4536 16 Pins 2nA 5V 16-DIP (0.300, 7.62mm)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX4536CPE
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 608
  • Description: 100ns, 50ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4536 16 Pins 2nA 5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 1996
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 100Ohm
Terminal Finish Tin/Lead (Sn85Pb15)
Subcategory Multiplexer or Switches
Technology CMOS
Peak Reflow Temperature (Cel) 240
Number of Functions 4
Supply Voltage 5V
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number MAX4536
Output SEPARATE OUTPUT
Pin Count 16
JESD-30 Code R-PDIP-T16
Qualification Status Not Qualified
Power Supplies 3/+-5V
Number of Channels 1
Number of Circuits 4
Operating Supply Current 1μA
Throw Configuration SPST
Voltage - Supply, Single/Dual (±) 2V~12V ±2V~6V
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
On-State Resistance (Max) 100Ohm
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 65 dB
Current - Leakage (IS(off)) (Max) 2nA
Channel Capacitance (CS(off), CD(off)) 2pF 2pF
On-state Resistance Match-Nom 4Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 100ns, 50ns
Charge Injection 1pC
Channel-to-Channel Matching (ΔRon) 1 Ω
Crosstalk -75dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 100ns
Switch-off Time-Max 50ns
Normal Position NO
Length 19.175mm
Width 7.62mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MAX4536CPE Overview


Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have a number of circuits 1:1. Increasing operating temperature to around 0°C~70°C TA. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. The analog switch ics are built using SPST - NO switching circuits. There are 4 circuits in this multiplexer. Try searching with MAX4536 if you're looking for variants. A 100Ohm internal resistance characterizes this multiplexer. The analogue multiplexer in this example is a typical Multiplexer or Switches. An effective Dual, Single supply digital multiplexer. In order to operate this switch device, it would need a current of 1μA. There are SEPARATE OUTPUT outputs on this analog switch ic.

MAX4536CPE Features


1 Channels
Switch Circuit: SPST - NO
1μA Supply Current

MAX4536CPE Applications


There are a lot of Maxim Integrated MAX4536CPE Analog Switches & Multiplexers ICs applications.

  • USB 1.1 signal switching circuits
  • Channelized and Unchannelized DS3 applications
  • Audio signal routing
  • Avionics
  • Industrial
  • Automotive applications
  • Cellular phones
  • Relay Replacement
  • E1 Multiplexer
  • HDTV

Write a review

Note: HTML is not translated!
    Bad           Good