MAX4536EEE

100ns, 50ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4536 16 Pins 2nA 5V 16-SSOP (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4536EEE
Package: 16-SSOP (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 946
Description: 100ns, 50ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4536 16 Pins 2nA 5V 16-SSOP (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Package / Case	16-SSOP (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1996
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	800mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.635mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4536
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	3/+-5V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	6V
Min Supply Voltage	-6V
Operating Supply Current	1μA
Nominal Supply Current	50nA
Max Supply Current	10μA
Throw Configuration	SPST
Turn On Delay Time	125 ns
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	60 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	2V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	2pF 2pF
On-state Resistance Match-Nom	4Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	100ns, 50ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-75dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	100ns
Switch-off Time-Max	50ns
Normal Position	NO
Height Seated (Max)	1.75mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead
Mount	Surface Mount
Mounting Type	Surface Mount

MAX4536EEE Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SSOP (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 16 terminations. As a result of its 1 channels, this electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. There is an electrical component included in the 16 series. Unlike digital switches, these are based on SPST - NO switching circuits. It consists of 4 circuits. If you are looking for variants of the digital switch, trying search with MAX4536. Internally, this switch multiplexer has a resistance of 100Ohm. The datasheets for the 16 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 6V to a switch device. The digital multiplexer has a low cost Dual, Single supply. -6V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 1μA current. If put voltage greater than 10μA on the device, damage may be caused to the analogue multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 6VWith dual power supplies, you should attach at least 2V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.