MAX4537CEE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4537 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/+-5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Operating Supply Current | 1μA |
| Throw Configuration | SPST |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 100ns, 50ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -75dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 100ns |
| Switch-off Time-Max | 50ns |
| Normal Position | NC |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4537CEE Overview
Packed in 16-SSOP (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. In Surface Mount, you'll find this switch device. 1:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around 0°C~70°C TA are extended for operation. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. A SPST - NC switching circuit is used to build these analog multiplexers. The multiplexer consists of 4 circuits. Try searching with MAX4537 if you're looking for variants. There is 100Ohm internal resistance in this digital multiplexer. The analogue multiplexer in this example is a typical Multiplexer or Switches. Analog switch ics with Dual, Single supply type are cost-effective. For this digital switch to work, 1μA current would suffice. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
MAX4537CEE Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
MAX4537CEE Applications
There are a lot of Maxim Integrated MAX4537CEE Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Medical Instrumentation
- High reliability control systems
- Audio and video switching
- Remote Powered Equipment
- Transmit
- Audio and video signal routing
- Routers
- Audio signal routing
- 65 V DACs
