MAX4541CPA
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 60Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4541 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 100ns |
| Switch-off Time-Max | 75ns |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Normal Position | NO |
| Length | 9.375mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX4541CPA Overview
Shipping overseas is convenient due to the electrical component's packing in 8-DIP (0.300, 7.62mm). This high-reliability packaging method uses advanced packaging methods Tube. Multiplexers like this are mounted in the Through Hole position. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature around 0°C~70°C TA extended. There are 8 terminations totally. By its 1 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. This electronic part can be found in the 8 series. A SPST - NO switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 2. Try searching for MAX4541 variants of the analog switch ic. In this multiplexer, the internal resistance is 60Ohm. Datasheets for 8 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 12V in normal situations. There should be 2.7V voltage fed to the electrical part below 2.7V. A voltage of 2.7V~12V is required for this switch device, which drains from a single voltage source. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
MAX4541CPA Features
1 Channels
Switch Circuit: SPST - NO
MAX4541CPA Applications
There are a lot of Maxim Integrated MAX4541CPA Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- Wireless Local Loop
- Precision instrumentation
- Cable Modem
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Modems
- Channel Banks
- Intelligent PBX
- Microwave transmission systems
- E1 Network Equipment
