MAX4541CSA+

100ns, 75ns SPST - NO 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4541 8 Pins 100pA 5V 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4541CSA+
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 855
Description: 100ns, 75ns SPST - NO 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4541 8 Pins 100pA 5V 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2007
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	60Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	471mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4541
Output	SEPARATE OUTPUT
Pin Count	8
Operating Supply Voltage	9V
Power Supplies	3.3/5V
Number of Channels	2
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	100pA
Nominal Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	125 ns
Supply Type	Single
Turn-Off Delay Time	400 ns
On-State Resistance (Max)	60Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	76 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
On-state Resistance Match-Nom	0.8Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	100ns, 75ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	800m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	100ns
Switch-off Time-Max	75ns
Voltage - Supply, Single (V+)	2.7V~12V
Normal Position	NO
Height	1.3mm
Length	3mm
Width	1.75mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

MAX4541CSA+ Overview

The electronic component is convenient to ship overseas because it is packed in a 8-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature extended to 0°C~70°C TA. In total, there are 8 terminations. Due to its 2 channels, the electrical component produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. As part of its design, the 8 series is equipped with this electronic component. These analog multiplexers are built based on SPST - NO switching circuits. Using the MAX4541 search parameter, you can discover variants of the switch. This digital multiplexer has 60Ohm internal resistance. Datasheets for 8 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 12V should not normally be supplied to the switches. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 2.7V. This digital switch can be operated with a current of 100pA. A voltage of 2.7V~12V is required to drain this analog switch from a single voltage supply. Put voltage above 1μA on the multiplexer to cause damage. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating voltages of 9V are compatible with the electrical part.