Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2007 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
60Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
471mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4541 |
Output |
SEPARATE OUTPUT |
Pin Count |
8 |
Operating Supply Voltage |
9V |
Power Supplies |
3.3/5V |
Number of Channels |
2 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
100pA |
Nominal Supply Current |
1μA |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
125 ns |
Supply Type |
Single |
Turn-Off Delay Time |
400 ns |
On-State Resistance (Max) |
60Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
76 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
8pF 8pF |
On-state Resistance Match-Nom |
0.8Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
100ns, 75ns |
Charge Injection |
1pC |
Channel-to-Channel Matching (ΔRon) |
800m Ω |
Crosstalk |
-90dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
100ns |
Switch-off Time-Max |
75ns |
Voltage - Supply, Single (V+) |
2.7V~12V |
Normal Position |
NO |
Height |
950μm |
Length |
3.1mm |
Width |
3.1mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX4541CUA Overview
Due to its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around 0°C~70°C TA. There are 8 terminations totally. The electronic part delivers high-quality output through its 2 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. As part of its design, the 8 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with MAX4541. Analog switches have 60Ohm internal resistance. To find out what the functions of 8 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 12V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. There should be 2.7V voltage fed to the electrical part below 2.7V. This multiplexer would work with 100pA current. A voltage of 2.7V~12V is required to drain this analog switch from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. The electronic component can function from 9V.
MAX4541CUA Features
2 Channels
Switch Circuit: SPST - NO
100pA Supply Current
MAX4541CUA Applications
There are a lot of Maxim Integrated MAX4541CUA Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- Private Branch Exchange (PBX)
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- DSLAMs
- High-Voltage
- Battery Powered Systems
- Medical systems
- DVD-R
- Audio and video routing
- Audio/video switches