MAX4541EPA
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-on Time-Max | 100ns |
| Switch-off Time-Max | 75ns |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Length | 9.375mm |
| RoHS Status | Non-RoHS Compliant |
MAX4541EPA Overview
Packed in 8-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 8. The electronic part delivers high-quality output through its 1 channels. A 5V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 8 series. A SPST - NO switching circuit is used for these analog switches. The multiplexer consists of 2 circuits. This analogue multiplexer requires a voltage of 2.7V~12V when it drains from a single voltage supply.
MAX4541EPA Features
1 Channels
Switch Circuit: SPST - NO
MAX4541EPA Applications
There are a lot of Rochester Electronics, LLC MAX4541EPA Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Relay replacements
- Imaging
- Residential Gateways, Home Gateway/Router
- Medical Instrumentation
- Audio and video switching
- Medical
- Cable Modem
- Multi-Line E1 Interface Cards
- CSU
