MAX4541ETA+

100ns, 75ns SPST - NO 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4541 100pA 5V 8-WDFN Exposed Pad

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4541ETA+
Package: 8-WDFN Exposed Pad
Datasheet: PDF
Stock: 269
Description: 100ns, 75ns SPST - NO 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4541 100pA 5V 8-WDFN Exposed Pad(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	8-WDFN Exposed Pad
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2007
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	60Ohm
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.635mm
Base Part Number	MAX4541
Output	SEPARATE OUTPUT
Power Supplies	5V
Number of Circuits	2
Max Supply Voltage	12V
Min Supply Voltage	2.7V
On-State Resistance (Max)	60Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	100ns, 75ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	800m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	100ns
Voltage - Supply, Single (V+)	2.7V~12V
Normal Position	NO
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4541ETA+ Overview

Shipping overseas is convenient with the electronic component packed in 8-WDFN Exposed Pad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. A total of 8 terminations have been recorded. An 5V voltage supply should allow the electrical part to be turned on and run. These analog multiplexers are built based on SPST - NO switching circuits. Circuits number 2 make up this analogue multiplexer. Try searching for MAX4541 variants of the analog switch ic. This digital multiplexer has 60Ohm internal resistance. For details about the functions of 8 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 12V volts for the multiplexer. It is recommended to use 2.7V as the lowest voltage for the electrical part. The voltage required by this switch device is 2.7V~12V, draining from a single voltage supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.