MAX4543CPA
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-on Time-Max | 100ns |
| Switch-off Time-Max | 75ns |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Length | 9.375mm |
| RoHS Status | Non-RoHS Compliant |
MAX4543CPA Overview
Due to its 8-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tube. A switch device like this is mounted in Through Hole. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of 0°C~70°C TA degrees Celsius. There are 8 terminations totally. The electronic part delivers high-quality output through its 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. There are 8 pins injected into the electronic part body. A SPST - NO/NC switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 2. A voltage of 2.7V~12V is required for this switch device, which drains from a single voltage source.
MAX4543CPA Features
1 Channels
Switch Circuit: SPST - NO/NC
MAX4543CPA Applications
There are a lot of Rochester Electronics, LLC MAX4543CPA Analog Switches & Multiplexers ICs applications.
- Optical Applications
- High reliability control systems
- Access Concentrators
- Cross Connects
- Avionics
- High speed data transmission line cards
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Cable Modem
- ATM
- Imaging
