MAX4543CPA

100ns, 75ns SPST - NO/NC 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4543 8 Pins 100pA 5V 8-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4543CPA
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 449
Description: 100ns, 75ns SPST - NO/NC 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4543 8 Pins 100pA 5V 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2007
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	60Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	5V
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4543
Output	SEPARATE OUTPUT
Pin Count	8
JESD-30 Code	R-PDIP-T8
Qualification Status	Not Qualified
Power Supplies	3.3/5V
Number of Channels	1
Number of Circuits	2
On-State Resistance (Max)	60Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	76 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
On-state Resistance Match-Nom	0.8Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	100ns, 75ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	800m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	100ns
Switch-off Time-Max	75ns
Voltage - Supply, Single (V+)	2.7V~12V
Length	9.375mm
RoHS Status	Non-RoHS Compliant

MAX4543CPA Overview

Shipping overseas is convenient due to the electrical component's packing in 8-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Through Hole position. 1:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around 0°C~70°C TA. There are 8 terminations totally. A electrical component with 1 channels is capable of high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. A total of 8 pins are injected into the body of the electronic part. A SPST - NO/NC switching circuit is used for these analog switches. A total of 2 circuits make up this switch device. Try searching with MAX4543 to find analog multiplexer variants. Analog switches have 60Ohm internal resistance. This switch device is a typical Multiplexer or Switches. This analog switch requires a voltage of 2.7V~12V to drain from a single voltage supply. This analog switch ic utilizes SEPARATE OUTPUT output.