MAX4544CPA
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-off Time-Max | 75ns |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX4544CPA Overview
Due to its 8-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Through Hole. 2:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of 0°C~70°C TA degrees Celsius. Total terminations are 8. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. An injection of 8 pins is performed into the body of the electrical component. These analog multiplexers are built based on SPDT switching circuits. The multiplexer consists of 1 circuits. The voltage required by this switch device is 2.7V~12V, draining from a single voltage supply.
MAX4544CPA Features
1 Channels
Switch Circuit: SPDT
MAX4544CPA Applications
There are a lot of Rochester Electronics, LLC MAX4544CPA Analog Switches & Multiplexers ICs applications.
- Medical systems
- HDTV
- Precision instrumentation
- Battery Powered Instruments
- Communication systems
- Public switching systems
- Residential Gateways, Home Gateway/Router
- High-Voltage
- USB 1.1 signal switching circuits
- Audio signal routing
